plugout.net

Hi i add now the second disk

and is initzialized how can i do to have raid 0 configuration ?

there is some topic to read ?

what service i must activate to see disk from pc

how can personalize external web page
and how can i reach from internet

Thank you

I willing to help you but I suggest you first read the help pages of the web interface to find the information, its all there, and when having a problem that you cannot resolve using the help pages you post it here.

Ps if you use windows 10 you need to activate smb1 protocol in windows 10 to see your nas in file explorer. Windows 10 has it disabled by default.
Alternative you could use this in explorer

Code: Select all

\\ip-of-your-nas

fvdw wrote:I willing to help you but I suggest you first read the help pages of the web interface to find the information, its all there, and when having a problem that you cannot resolve using the help pages you post it here.

Ps if you use windows 10 you need to activate smb1 protocol in windows 10 to see your nas in file explorer. Windows 10 has it disabled by default.
Alternative you could use this in explorer

Code: Select all

\\ip-of-your-nas

ok i understand it i must check

what about the second disk
i initzialitze the second one
but did you have a guide to follow to have a raid 0 between the two disk i dont find anything

Thanks

For raid go to disks setup in the webinterface and click button make raid....

fvdw wrote:For raid go to disks setup in the webinterface and click button make raid....

ok created