First Installation fw18

[araldo60]

Hi for first set up

Install sequence
removed original disk
installed 1 disk on left side 2tb new without any configuration
installed console
closed any other nas
closed wifi net on pc
connection lan on (cable) pc the same of nas to be installed
open fw console
NAS is almost switched off
1) start stand alone kernel , load and start
2) select type of nas firewall ask permisson for tftp
3) switch on NAS and the consol interrupt the start .....
This step are correct ?
Sorry for question but i want to be sure

Thank you

[fvdw]

Yes, but the nas must be completely switched off (you mentioned almost switched off) before starting fvdw-sl console

[araldo60]

Yes, but the nas must be completely switched off (you mentioned almost switched off) before starting fvdw-sl console

yes that s right only wrong word that i wrote nas completely switced off

After this steps i dont understand well what i can do because i have a lot of choice wich is the next step ?


thanks

My target is 2 disks 2 tb and full configuration

[fvdw]

Follow the steps as written in the main window of the fvdw-sl console.
They appear after you have selected the standalone kernel and the window waiting for u-boot has appeared.

Ps you can not damage anything, so just try.

[Jocko]

Hi

To add a comment on fvdw's post, yes you can not damage anything if you want to install our firmware but do not try to flash the boot loader on the nas (it is absolutely useless)

Other point, I do not understand what you mean by

connection lan on (cable) pc the same of nas to be installed

Can you explain how the nas and pc are connected to your router.

[araldo60]

Hi

To add a comment on fvdw's post, yes you can not damage anything if you want to install our firmware but do not try to flash the boot loader on the nas (it is absolutely useless)

Other point, I do not understand what you mean by

connection lan on (cable) pc the same of nas to be installed

Can you explain how the nas and pc are connected to your router.

I tried to connect with step suggested

conected to my fritzbox 7590 lan attached nas and pc windows 10
step follewed
launched console program
launche first option kernel load
ask permission from windows firewall
start dialog window
auto1 clunc open - 192.168.1.252
provided by fvdw
waiting for u-boot ...
lacie light red
seeing something load
warning mo boot file name using ; FC01A8C0.img
tftp from server 192.168.1.196; our ip address is 192.168.1.252
file name 'FC01A8C0.img'
load address: 0x800000
loading TTTTTTT
after lauched telenet going in timeout
192.168.1.252 (lacie light is full red)
is this correct wich is next step to follow

Thanks

[fvdw]

No it is not correct
Which action did you select in fvdw-sl console?
Did you select a standalone kernel? And which one did you select?

This message is strange

warning mo boot file name using ; FC01A8C0.img

This is not a normal response of a 2big v1. It looks like it tries to load something from flash.

Also this is unclear

seeing something load

Please describe what is loaded


Seems some other device in your lan is responding to the console. Are there other devices connected to your lan ? If so disconnect them.

[araldo60]

No it is not correct
Which action did you select in fvdw-sl console?
Did you select a standalone kernel? And which one did you select?

This message is strange

warning mo boot file name using ; FC01A8C0.img

This is not a normal response of a 2big v1. It looks like it tries to load something from flash.

Also this is unclear

seeing something load

Please describe what is loaded


Seems some other device in your lan is responding to the console. Are there other devices connected to your lan ? If so disconnect them.

ok i will describe
there is no other connection like nas is neccessary only 1 pc and nas ?
i dont know if someone is on the wifi net i m sure the pc in attached via lan
and nas also
i use the first option in console stand alone kernel, load and start

wich image i must select for lacie 2big network vs 1.

[fvdw]

Disable your wifi ethernet card in your pc.
You must select in fvdw-sl console install firmware as action and as standalone kernel select the one with 2big1 in the name and ending on ... 1-1-4

[araldo60]

Disable your wifi ethernet card in your pc.
You must select in fvdw-sl console install firmware as action and as standalone kernel select the one with 2big1 in the name and ending on ... 1-1-4

ok it s loaded but the telnet reply time out
connection 169.254.209.252

the router setting 192.168.1.254
subnet mask 255.255.255.0

now the system say
retry count exceed, starting again
obviously i try to upload more than one time
on the system there is no internet connection
i need it ?

SOLVED SOLVED