Can't find my nas

[cmarcopolo]

Have been strugglin with this

My 2big vs1 wont show up on the network. Changed cables. all lights are on and blue. Network lights blinking.

Only a device appears on network places named BRW008092BEEA14 whan nas is plugged in

fvdw-sl-assistant.exe autoscan won't show any device

Already changed disk for a clean one

checked on DHCP list on router, it doesn't show up

previously worked fine

[fvdw]

which firmware do you use ? ours or lacie ?

[cmarcopolo]

Yours, installed 2 years ago, worked great

[fvdw]

Are you using windows 10?

Ps if you changed the disk by empty one then you will need to install firmware again

[cmarcopolo]

Are you using windows 10?

Ps if you changed the disk by empty one then you will need to install firmware again

Windows 10- yes, from three defferent machines all of them previously located said NAS

Yes, I woul have to reinstall the firmware, my problem is that I cannot locate de NAS within the network

Auto-scan wont locate it

[fvdw]

If you installed a new disk then you have to install firmware on it first to detect the nas.

Use the fvdw-sl console and the standalone kernel provided with it to see if you can connect to the nas. If thats the case then you can install firmware on your new disk

[grishin]

Windows 10- yes,

enable smb 1.0
https://support.microsoft.com/en-sg/kb/2696547
for located nas use putty.exe, connect via ssh, using host name BRW008092BEEA14
login root
password giveit2me
enter "ip route" without quotes and see your nas ip