Hi!
Received a 2big v1, 2 years ago with no disk.
Got myself two WD Caviar Black 1Tb (WD1002FAEX).
At time I managed to install FVDW-SL, and than I was not able to attach the second disk.
Than after several attempts, I managed to install LaCie firmware, but don’t know how, really. Lucky.
But with LaCie firmware I managed to have 2Tb of space.
But for the last 6 months, when the LaCie is unplugged from power, the only why to have it to work again, is buy making a recovery process, and never at the first recovery method.
The issue is when I turn the NAS on, it boots, starts blinking red, and then shutdown.
So I got tired of having to recover the NAS every time, so I tried to install FDVW-SL firmware.
The first installation went fine, but when it requested do reboot the NAS, the boot had the same issue as before.
That put me thinking what could be the issue with the NAS for having the same behaviour with both firmware’s, but I couldn’t figure it out, so here I am looking for some help and direction.
Do I have dead brick, can I recover it?
Thanks for the help.
plugout.net
Alternative firmware fvdw-sl
SPD8020, Lacie network space vs1,vs2 and max, 5big version 1&2, 2big version 1&2, internet space vs1, edmini_v2, D2 network version 1&2, raspberry Pi b
Can’t boot after installation
22 posts
• Page 1 of 3 • 1, 2, 3
Can’t boot after installation
by Redleh » Sat Apr 21, 2018 4:16 pm
- Redleh
- Donator VIP
- Posts: 28
- Joined: Wed Jul 23, 2014 10:11 am
Re: Can’t boot after installation
by fvdw » Sat Apr 21, 2018 6:04 pm
In which slot do you have the disk with fvdw-sl firmware?
- fvdw
- Site Admin - expert
- Posts: 13245
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
Re: Can’t boot after installation
by Redleh » Sat Apr 21, 2018 6:23 pm
Hi FVDW!
I have it on left side looking it from the back, just like the manual says.
Meanwhile I am stuck on boot load.
I do not know if this helps.
I have it on left side looking it from the back, just like the manual says.
Meanwhile I am stuck on boot load.
I do not know if this helps.
- Code: Select all
root@(none):/ # dmesg[J
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #47 PREEMPT Tue Feb 21 22:42:25 CET 2017
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 2Big Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c03ee948, node_mem_map c0400000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.2.252/,6666@192.168.2.20/
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60840k/60840k available, 4696k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc4800000 - 0xfd800000 ( 912 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc00e7000 ( 892 kB)
.text : 0xc00e7000 - 0xc03db000 (3024 kB)
.data : 0xc03dc000 - 0xc03ef020 ( 77 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5182-A2. TCLK=166666667.
net2big: power up SATA hard disks
net2big: Flash writing is not yet supported.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Switched to NOHz mode on CPU #0
NetWinder Floating Point Emulator V0.97 (double precision)
msgmni has been set to 118
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:83:91:95
netconsole: local port 6666
netconsole: local IP 192.168.2.252
netconsole: interface 'eth0'
netconsole: remote port 6666
netconsole: remote IP 192.168.2.20
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
netconsole: device eth0 not up yet, forcing it
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
i2c /dev entries driver
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: not present
Freeing init memory: 892K
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
ttyS0: 23 input overrun(s)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) show-memory-usage(M) nice-all-RT-tasks(N) show-registers(P) show-all-timers(Q) Sync show-task-states(T) Unmount show-blocked-tasks(W)
root@(none):/ #
- Redleh
- Donator VIP
- Posts: 28
- Joined: Wed Jul 23, 2014 10:11 am
Re: Can’t boot after installation
by fvdw » Sat Apr 21, 2018 6:32 pm
This is the standalone kernel I assume, or not?
Seems you have no disks inside as both sata links remains down?
If you have disk in the lefthand slot then it is strange that the standalone kernel doesn't detect it??
Anyhow if you have disk in this slot poweroff the nas, take the disk out and put it in the righthand slot and see if it boots. We have seen some 2big1 device with swapped sata connectors.
Seems you have no disks inside as both sata links remains down?
If you have disk in the lefthand slot then it is strange that the standalone kernel doesn't detect it??
Anyhow if you have disk in this slot poweroff the nas, take the disk out and put it in the righthand slot and see if it boots. We have seen some 2big1 device with swapped sata connectors.
- fvdw
- Site Admin - expert
- Posts: 13245
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
Re: Can’t boot after installation
by fvdw » Sat Apr 21, 2018 6:37 pm
I edited my previous post, it had some errors
- fvdw
- Site Admin - expert
- Posts: 13245
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
Re: Can’t boot after installation
by Redleh » Sat Apr 21, 2018 6:47 pm
Hi.
Yes, when I turn it on, the right rear light does come on first.
the log I sent was with no disk yes.
I trided it to boot with no disks.
The disk has no partition now, I belive the console instalation creates them right?
Thanks
Yes, when I turn it on, the right rear light does come on first.
the log I sent was with no disk yes.
I trided it to boot with no disks.
The disk has no partition now, I belive the console instalation creates them right?
Thanks
- Redleh
- Donator VIP
- Posts: 28
- Joined: Wed Jul 23, 2014 10:11 am
Re: Can’t boot after installation
by fvdw » Sat Apr 21, 2018 6:50 pm
yes the console installation program create it
- fvdw
- Site Admin - expert
- Posts: 13245
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
Re: Can’t boot after installation
by Redleh » Sat Apr 21, 2018 6:54 pm
Hi
Here is the log with disk on the right side.
Am I on the right track?
Here is the log with disk on the right side.
Am I on the right track?
- Code: Select all
root@(none):/ # dmesg[J
Linux version 2.6.39.4 (root@fvdwsl-5big2.local) (gcc version 4.8.1 (GCC) ) #47 PREEMPT Tue Feb 21 22:42:25 CET 2017
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
CPU: VIVT data cache, VIVT instruction cache
Machine: LaCie 2Big Network
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c03ee948, node_mem_map c0400000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.2.252/,6666@192.168.2.20/
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60840k/60840k available, 4696k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc4800000 - 0xfd800000 ( 912 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc00e7000 ( 892 kB)
.text : 0xc00e7000 - 0xc03db000 (3024 kB)
.data : 0xc03dc000 - 0xc03ef020 ( 77 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:64
sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5182-A2. TCLK=166666667.
net2big: power up SATA hard disks
net2big: Flash writing is not yet supported.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Switched to NOHz mode on CPU #0
NetWinder Floating Point Emulator V0.97 (double precision)
msgmni has been set to 118
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:83:91:95
netconsole: local port 6666
netconsole: local IP 192.168.2.252
netconsole: interface 'eth0'
netconsole: remote port 6666
netconsole: remote IP 192.168.2.20
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
netconsole: device eth0 not up yet, forcing it
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
console [netcon0] enabled
netconsole: network logging started
aoe: AoE v47 initialised.
i2c /dev entries driver
at24 0-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: not present
Freeing init memory: 892K
root@(none):/ #
- Redleh
- Donator VIP
- Posts: 28
- Joined: Wed Jul 23, 2014 10:11 am
Re: Can’t boot after installation
by fvdw » Sat Apr 21, 2018 6:57 pm
- fvdw
- Site Admin - expert
- Posts: 13245
- Joined: Tue Apr 12, 2011 2:30 pm
- Location: Netherlands
Re: Can’t boot after installation
by Redleh » Sat Apr 21, 2018 7:01 pm
:dontknow
- Code: Select all
root@(none):/ # fvdw-sl-programs[J
fvdw-sl-programs.sh 100% |****************************************************************| 3520 0:00:00 ETA
fvdw-sl-programs.sh 100% |****************************************************************| 3520 0:00:00 ETA
fvdw-sl-programs version 1.0
step 1: check to make sure all dependencies are present on the server and nas:
Dialog: Present
mkdir: can't create directory '/usr/share/terminfo': File exists
mkdir: can't create directory '/usr/share/terminfo/x': File exists
xterm 100% |****************************************************************| 3258 0:00:00 ETA
xterm 100% |****************************************************************| 3258 0:00:00 ETA
xterm installed
fvdw-sl-programs.txt 100% |****************************************************************| 278 0:00:00 ETA
fvdw-sl-programs.txt 100% |****************************************************************| 278 0:00:00 ETA
fvdw i = fvdw-sl-installer-3-1.sh
fvdw i = fvdw-sl-image-writer-3-1.sh
fvdw i = lacie-firmware-backup-2-0.sh
fvdw i = upload-glibc-tools-archive.sh
fvdw i = Install fvdw-sl firmware on a hard disk
fvdw i = Write fvdw-sl firmware image to partition 1,2, or 7
fvdw i = Backup lacie stock firmware
fvdw i = Upload and extract glibc mini and tools
[?1049h[1;47r(B[m[4l[?7h[?1049l[H[2J[?1h=[?1000h[39;49m[?1h=[?1h=[39;49m(B[m[H[2J[35d(B[0;1m[36m[44m[J[H[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K[13;15H[1K (0[0;1m[37m[47mlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(B[0;1m[34m[47mSelect script(0[0;1m[37m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mk(B[0;1m[36m[44m[K[14;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m use up/down arrow, or number to select the shell script[22X[14;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[15;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0;1m[37m[47mk(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[16;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m (B[0;1m[31m[44m1(B[0m[30m[47m (B[0;1m[37m[44mInstall fvdw-sl firmware on a hard disk(B[0m[30m[47m[22X[16;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[17;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m2[30m[47m Write fvdw-sl firmware image to partition 1,2, or 7 (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[18;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m3[30m[47m Backup lacie stock firmware[34X[18;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[19;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m4[30m[47m Upload and extract glibc mini and tools[22X[19;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[20;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47mx[30m[47m exit script[50X[20;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[21;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[37m[47m[74X[21;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[22;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mm(0[0;1m[37m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[23;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[23;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[24;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[24;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[25;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[25;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[26;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[26;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[27;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[27;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[28;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[28;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[29;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[29;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[30;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[30;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[31;15H[1K (0[0;1m[37m[47mtqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mu(B[0;1m[30m[40m [36m[44m[K[32;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[32;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[33;15H[1K (0[0;1m[37m[47mm(0[0m[30m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[0;1m[30m[40m [36m[44m[K[34;17H[1K [30m[40m[80X[34;98H[36m[44m[K[22;94H[39;49m(B[m[32;40H(B[0;1m[37m[44m<[33m[44m [37m[44mO[33m[44mK [37m[44m>[32;60H(B[0m[30m[47m<[31m[47mC(B[0;1m[30m[47mancel(B[0m[30m[47m>[32;43H[39;49m(B[m[34;97H[?1000l[47;1H
[?1l>scriptname fvdw-sl-installer-3-1.sh
fvdw-sl-installer-3- 100% |****************************************************************| 26602 0:00:00 ETA
fvdw-sl-installer-3- 100% |****************************************************************| 26602 0:00:00 ETA
fvdw-sl installer version 3.1
[H[Jstep 1: check to make sure all dependencies are present on the server and nas:
Dialog: Present
mkdir: can't create directory '/usr/share/terminfo': File exists
mkdir: can't create directory '/usr/share/terminfo/x': File exists
xterm 100% |****************************************************************| 3258 0:00:00 ETA
xterm 100% |****************************************************************| 3258 0:00:00 ETA
xterm installed
mke2fs-ext3 installed
gdisk installed
/fvdw-sl-installer-3-1.sh: line 104: -E: not found
[?1049h[1;47r(B[m[4l[?7h[?1049l[H[2J[?1h=[?1000h[39;49m[?1h=[39;49m(B[m[H[2J[33d(B[0;1m[36m[44m[J[H[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K[16;20H[1K (0[0;1m[37m[47mlqqqqqqqqqqqqqqqq(B[0;1m[34m[47mfvdw-sl firmware installer V: 3.1(0[0;1m[37m[47mqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mk(B[0;1m[36m[44m[K[17;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[17;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[18;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[18;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[19;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[19;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[20;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[20;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[21;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[21;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[22;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[22;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[23;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[23;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[24;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[24;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[25;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[25;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[26;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[26;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[27;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[27;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[28;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[68X[28;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[29;20H[1K (0[0;1m[37m[47mtqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mu(B[0;1m[30m[40m [36m[44m[K[30;20H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[29X[30;51H(B[0;1m[37m[44m<[33m[44m [37m[44mO[33m[44mK [37m[44m>(B[0m[30m[47m[31X[30;90H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[31;20H[1K (0[0;1m[37m[47mm(0[0m[30m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[0;1m[30m[40m [36m[44m[K[32;22H[1K [30m[40m[70X[32;93H[36m[44m[K[30;54H[39;49m(B[m[18;23H[30m[47mThis script prepares your hard disk for installation of fvdw-sl[19;23Hfirmware and after that it installs the firmware.[21;23HAll we need is some info from you.[23;23HThe installer generates a log file (installer.log).[24;23HAfter it exits you can view it by giving command:[25;23Hcat installer.log[30;54H[39;49m(B[m[32;92H[?1000l[47;1H
[?1l>[?1049h[1;47r(B[m[4l[?7h[?1049l[H[2J[?1h=[?1000h[39;49m[?1h=[?1h=[39;49m(B[m[H[2J[35d(B[0;1m[36m[44m[J[H[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K
[K[14;15H[1K (0[0;1m[37m[47mlqqqqqqqqqqqqqqqqqqqqq(B[0;1m[34m[47mfvdw-sl firmware installer V: 3.1(0[0;1m[37m[47mqqqqqqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mk(B[0;1m[36m[44m[K[15;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m use up/down arrow, number, to select your device[29X[15;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[16;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0;1m[37m[47mk(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[17;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m (B[0;1m[31m[44m1(B[0m[30m[47m (B[0;1m[37m[44mlacie kirkwood nwsp2,D2N2,isp2,nwsp2max(B[0m[30m[47m[29X[17;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[18;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m2[30m[47m lacie kirkwood 2big2[48X[18;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[19;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m3[30m[47m lacie kirkwood 5big2[48X[19;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[20;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m4[30m[47m lacie kirkwood cloudbox[45X[20;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[21;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m5[30m[47m lacie kirkwood wireless space[39X[21;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[22;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m6[30m[47m lacie orion 5big vs1[48X[22;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[23;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m7[30m[47m lacie orion 2big vs1 with u-boot 1.1.4[30X[23;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[24;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m8[30m[47m lacie orion 2big vs1 with u-boot 1.1.1[30X[24;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[25;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m9[30m[47m lacie orion internet space vs1 and other based on edmini_v2 board (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[26;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m1(B[0;1m[34m[47m0(B[0m[30m[47m lacie orion network space vs1 with original u-boot[18X[26;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[27;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m1(B[0;1m[34m[47m1(B[0m[30m[47m lacie orion network space vs1 with upgraded u-boot[18X[27;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[28;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m1(B[0;1m[34m[47m2(B[0m[30m[47m philips orion spd8020 with upgraded u-boot[26X[28;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[29;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0m[30m[47m [31m[47m1(B[0;1m[34m[47m3(B[0m[30m[47m not listed, abort script[44X[29;93H(0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[30;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m (0[0m[30m[47mm(0[0;1m[37m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[0m[30m[47m (0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[31;15H[1K (0[0;1m[37m[47mtqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq(0[0m[30m[47mu(B[0;1m[30m[40m [36m[44m[K[32;15H[1K (0[0;1m[37m[47mx(B[0m[30m[47m[78X[32;95H(0[0m[30m[47mx(B[0;1m[30m[40m [36m[44m[K[33;15H[1K (0[0;1m[37m[47mm(0[0m[30m[47mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj(B[0;1m[30m[40m [36m[44m[K[34;17H[1K [30m[40m[80X[34;98H[36m[44m[K[30;94H[39;49m(B[m[32;40H(B[0;1m[37m[44m<[33m[44m [37m[44mO[33m[44mK [37m[44m>[32;60H(B[0m[30m[47m<[31m[47mC(B[0;1m[30m[47mancel(B[0m[30m[47m>[32;43H[39;49m(B[m[17;21H[31m[47m1[30m[47m lacie kirkwood nwsp2,D2N2,isp2,nwsp2max[18;21H(B[0;1m[31m[44m2(B[0m[30m[47m (B[0;1m[37m[44mlacie kirkwood 2big2[32;43H[39;49m(B[m[18;21H[31m[47m2[30m[47m lacie kirkwood 2big2[19;21H(B[0;1m[31m[44m3(B[0m[30m[47m (B[0;1m[37m[44mlacie kirkwood 5big2[32;43H[39;49m(B[m[19;21H[31m[47m3[30m[47m lacie kirkwood 5big2[20;21H(B[0;1m[31m[44m4(B[0m[30m[47m (B[0;1m[37m[44mlacie kirkwood cloudbox[32;43H[39;49m(B[m[20;21H[31m[47m4[30m[47m lacie kirkwood cloudbox[21;21H(B[0;1m[31m[44m5(B[0m[30m[47m (B[0;1m[37m[44mlacie kirkwood wireless space[32;43H[39;49m(B[m[21;21H[31m[47m5[30m[47m lacie kirkwood wireless space[22;21H(B[0;1m[31m[44m6(B[0m[30m[47m (B[0;1m[37m[44mlacie orion 5big vs1[32;43H[39;49m(B[m[22;21H[31m[47m6[30m[47m lacie orion 5big vs1[23;21H(B[0;1m[31m[44m7(B[0m[30m[47m (B[0;1m[37m[44mlacie orion 2big vs1 with u-boot 1.1.4[32;43H[39;49m(B[m[34;97H[?1000l[47;1H
[?1l>fdisk: can't open '/dev/sda': No such device or address
diskid=none
There was an error detecting device sda, this device is required to install firmware.
Installer will exit
root@(none):/ # cat installer.log
fvdw-sl-installer log
tftpd ip address 192.168.2.20
getting required programs from tftp server 192.168.2.20
Dialog installed
xterm installed
mke2fs-ext3 present
gdisk present
Start fvdw-sl firmware installer version 3.1
selected nas type 2big1 platform orion
There was an error detecting device sda, this device is required to install firmware. Installer will exit
root@(none):/ # fdisk -l
root@(none):/ #
- Redleh
- Donator VIP
- Posts: 28
- Joined: Wed Jul 23, 2014 10:11 am
22 posts
• Page 1 of 3 • 1, 2, 3
Return to Lacie 2Big Network vs1
Who is online
Users browsing this forum: No registered users and 2 guests