plugout.net

by **tenhouse** » Tue Sep 10, 2013 5:17 pm

Hi I downloaded the fvdw tool ( 14-0-9jun13) and the image I chose was the standard one "UIMAGE-26394-NWSP2CL-STANDALONE-164" - if this answer your question.

by **fvdw** » Tue Sep 10, 2013 5:31 pm

yes this answer my question and it is the correct one.
When you use that standalone kernel the dmesg output should be clean without the error message as you posted. Below the dmesg output of a my 5big2 when running the standalone kernel.
Also not the difference in time stamps, mines complte loading in 13 seconds, yours fails after 102 seconds,reason it is waiting for the disks..
It could be helpful to see were it fails if you post the full output of dmesg command

Code: Select all: (none) login: root Password: root@(none):/ # dmesg [ 0.000000] Linux version 2.6.39.4 (root@fvdwsl-nwsp2.local) (gcc version 4.5.4 (GCC) ) #164 PREEMPT Sun Jun 2 20:34:28 GMT+1 2013 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network Nand v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c08fc70c, node_mem_map c0937000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.1.252/,6666@192.168.1.44/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 510320k/510320k available, 13968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0222000 (2152 kB) [ 0.000000] .text : 0xc0222000 - 0xc08cacec (6820 kB) [ 0.000000] .data : 0xc08cc000 - 0xc08fcde0 ( 196 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 7.151487] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 7.241512] pid_max: default: 32768 minimum: 301 [ 7.241654] Mount-cache hash table entries: 512 [ 7.241969] CPU: Testing write buffer coherency: ok [ 7.243904] xor: measuring software checksum speed [ 7.291492] arm4regs : 1090.000 MB/sec [ 7.341487] 8regs : 654.400 MB/sec [ 7.391484] 32regs : 906.000 MB/sec [ 7.391496] xor: using function: arm4regs (1090.000 MB/sec) [ 7.391630] NET: Registered protocol family 16 [ 7.393894] Kirkwood: MV88F6281-A1, TCLK=166666667. [ 7.393909] Feroceon L2: Enabling L2 [ 7.393944] Feroceon L2: Cache support initialised. [ 7.395072] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 7.395104] final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 7.395251] orion-ehci registered [ 7.395988] init_kirwood_nand_1init_kirwood_nand_2init_kirwood_nand_3 [ 7.415248] bio: create slab <bio-0> at 0 [ 7.581626] raid6: int32x1 100 MB/s [ 7.751707] raid6: int32x2 138 MB/s [ 7.921872] raid6: int32x4 129 MB/s [ 8.091568] raid6: int32x8 154 MB/s [ 8.091577] raid6: using algorithm int32x8 (154 MB/s) [ 8.092258] SCSI subsystem initialized [ 8.092624] libata version 3.00 loaded. [ 8.093218] usbcore: registered new interface driver usbfs [ 8.093465] usbcore: registered new interface driver hub [ 8.093623] usbcore: registered new device driver usb [ 8.095142] Switching to clocksource orion_clocksource [ 8.096914] NET: Registered protocol family 2 [ 8.097073] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 8.097662] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 8.098015] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 8.098194] TCP: Hash tables configured (established 16384 bind 16384) [ 8.098204] TCP reno registered [ 8.098214] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 8.098237] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 8.098455] NET: Registered protocol family 1 [ 8.098681] RPC: Registered udp transport module. [ 8.098691] RPC: Registered tcp transport module. [ 8.098699] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.098712] PCI: CLS 0 bytes, default 32 [ 8.101492] Switched to NOHz mode on CPU #0 [ 8.114282] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.198907] VFS: Disk quotas dquot_6.5.2 [ 8.199203] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.200929] Registering unionfs 2.5.11 (for 2.6.39.4) [ 8.202338] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.203220] NTFS driver 2.1.30 [Flags: R/W]. [ 8.203737] JFFS2 version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. [ 8.204717] fuse init (API version 7.16) [ 8.206562] JFS: nTxBlock = 3986, nTxLock = 31895 [ 8.207804] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.209806] SGI XFS Quota Management subsystem [ 8.209839] msgmni has been set to 996 [ 8.210520] async_tx: api initialized (async) [ 8.210935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.210950] io scheduler noop registered [ 8.210958] io scheduler deadline registered [ 8.211055] io scheduler cfq registered (default) [ 8.215634] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.236580] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 8.706210] console [ttyS0] enabled [ 8.716235] brd: module loaded [ 8.722410] loop: module loaded [ 8.727075] sata_mv sata_mv.0: version 1.28 [ 8.731353] sata_mv sata_mv.0: slots 32 ports 2 [ 8.737621] scsi0 : sata_mv [ 8.740877] scsi1 : sata_mv [ 8.743953] ata1: SATA max UDMA/133 irq 21 [ 8.748111] ata2: SATA max UDMA/133 irq 21 [ 8.753249] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 8.759923] ONFI flash detected [ 8.763327] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit) [ 8.771807] Scanning device for bad blocks [ 8.937408] Creating 3 MTD partitions on "orion_nand": [ 8.942523] 0x000000000000-0x000000100000 : "u-boot" [ 8.948382] 0x000000100000-0x000001100000 : "uImage" [ 8.954202] 0x000001100000-0x000010000000 : "root" [ 8.960784] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.967734] mv643xx_eth smi: probed [ 8.973386] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:93:07:72 [ 8.984225] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:d0:4b:93:07:73 [ 8.993146] PPP generic driver version 2.4.2 [ 8.997724] PPP Deflate Compression module registered [ 9.003143] PPP MPPE Compression module registered [ 9.007962] NET: Registered protocol family 24 [ 9.012404] tun: Universal TUN/TAP device driver, 1.6 [ 9.017477] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 9.023788] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 9.032135] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 9.040938] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 9.048536] usbcore: registered new interface driver pegasus [ 9.054306] usbcore: registered new interface driver ipheth [ 9.059887] netconsole: local port 6666 [ 9.063704] netconsole: local IP 192.168.1.252 [ 9.068148] netconsole: interface 'eth0' [ 9.072049] netconsole: remote port 6666 [ 9.075977] netconsole: remote IP 192.168.1.44 [ 9.080396] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 9.086475] netconsole: device eth0 not up yet, forcing it [ 9.255187] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.262097] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 9.275588] ata1.00: hard resetting link [ 9.625900] ata1.01: hard resetting link [ 10.135422] ata1.02: hard resetting link [ 10.645428] ata1.03: hard resetting link [ 11.175392] ata1.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 11.181369] ata1.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.205400] ata1.01: configured for UDMA/133 [ 11.225379] ata1.02: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 11.231361] ata1.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.255377] ata1.02: configured for UDMA/133 [ 11.295209] ata1.03: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133 [ 11.301880] ata1.03: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.345225] ata1.03: configured for UDMA/133 [ 11.349650] ata1: EH complete [ 11.365448] scsi 0:1:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 11.374244] sd 0:1:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 11.382412] scsi 0:2:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 11.390718] sd 0:1:0:0: [sdc] Write Protect is off [ 11.395516] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 11.395607] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.405501] sd 0:2:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 11.414254] scsi 0:3:0:0: Direct-Access ATA WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5 [ 11.422879] sd 0:2:0:0: [sdb] Write Protect is off [ 11.428120] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.428229] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.437927] sd 0:3:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 11.446065] sd 0:3:0:0: [sda] 4096-byte physical blocks [ 11.452304] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 [ 11.458366] sd 0:3:0:0: [sda] Write Protect is off [ 11.464735] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.464846] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.475245] sd 0:1:0:0: [sdc] Attached SCSI disk [ 11.504282] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 [ 11.511705] sd 0:2:0:0: [sdb] Attached SCSI disk [ 11.553215] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 11.560652] sd 0:3:0:0: [sda] Attached SCSI disk [ 11.955186] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.962082] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 11.975875] ata2.00: hard resetting link [ 12.325900] ata2.01: hard resetting link [ 12.340014] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 12.350859] console [netcon0] enabled [ 12.354518] netconsole: network logging started [ 12.360395] aoe: AoE v47 initialised. [ 12.364094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.370691] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 12.375960] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 12.405191] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 12.425186] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 12.431132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.437918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.445118] usb usb1: Product: Marvell Orion EHCI [ 12.449820] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd [ 12.455393] usb usb1: SerialNumber: orion-ehci.0 [ 12.460495] hub 1-0:1.0: USB hub found [ 12.464273] hub 1-0:1.0: 1 port detected [ 12.468752] Initializing USB Mass Storage driver... [ 12.473811] usbcore: registered new interface driver usb-storage [ 12.479834] USB Mass Storage support registered. [ 12.484769] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.492101] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 12.498058] i2c /dev entries driver [ 12.502317] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 12.509788] Linux video capture interface: v2.00 [ 12.514648] usbcore: registered new interface driver uvcvideo [ 12.520442] USB Video Class driver (v1.0.0) [ 12.526184] md: linear personality registered for level -1 [ 12.531659] md: raid0 personality registered for level 0 [ 12.536987] md: raid1 personality registered for level 1 [ 12.542283] md: raid10 personality registered for level 10 [ 12.547769] md: raid6 personality registered for level 6 [ 12.553064] md: raid5 personality registered for level 5 [ 12.558372] md: raid4 personality registered for level 4 [ 12.564497] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 12.573351] device-mapper: multipath: version 1.3.0 loaded [ 12.578866] device-mapper: multipath round-robin: version 1.0.0 loaded [ 12.585499] device-mapper: multipath queue-length: version 0.1.0 loaded [ 12.592094] device-mapper: multipath service-time: version 0.2.0 loaded [ 12.599125] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 12.605382] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 12.611742] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 12.655209] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 12.685923] ata2.02: hard resetting link [ 12.695211] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 12.735207] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 12.775204] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 12.781517] Registered led device: net5big-v2:blue:power [ 12.781659] Registered led device: net5big-v2:red:power [ 12.781802] Registered led device: net5big-v2:blue:sata0 [ 12.781947] Registered led device: net5big-v2:red:sata0 [ 12.782091] Registered led device: net5big-v2:blue:sata1 [ 12.782238] Registered led device: net5big-v2:red:sata1 [ 12.782388] Registered led device: net5big-v2:blue:sata2 [ 12.782543] Registered led device: net5big-v2:red:sata2 [ 12.782686] Registered led device: net5big-v2:blue:sata3 [ 12.782842] Registered led device: net5big-v2:red:sata3 [ 12.782988] Registered led device: net5big-v2:blue:sata4 [ 12.783139] Registered led device: net5big-v2:red:sata5 [ 12.784233] Netfilter messages via NETLINK v0.30. [ 12.788984] usb 1-1: new high speed USB device number 2 using orion-ehci [ 12.795843] nf_conntrack version 0.5.0 (7973 buckets, 31892 max) [ 12.803503] IPv4 over IPv4 tunneling driver [ 12.809517] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.814941] TCP cubic registered [ 12.819437] NET: Registered protocol family 10 [ 12.829188] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.834766] IPv6 over IPv4 tunneling driver [ 12.841621] NET: Registered protocol family 17 [ 12.846195] NET: Registered protocol family 5 [ 12.885352] NET: Registered protocol family 37 [ 12.889788] VFP support v0.3: not present [ 12.893806] Gating clock of unused units [ 12.893815] before: 0x00cfc1dd [ 12.893823] after: 0x00cfc1c9 [ 12.894394] rtc-mv rtc-mv: setting system clock to 2013-09-10 18:28:05 UTC (1378837685) [ 12.945608] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 12.952302] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.960156] hub 1-1:1.0: USB hub found [ 12.963976] hub 1-1:1.0: 2 ports detected [ 13.035925] ata2.03: hard resetting link [ 13.386068] ata2: EH complete [ 13.405444] Freeing init memory: 2152K [ 23.675171] eth0: no IPv6 routers present root@(none):/ #

by **Mijzelf** » Tue Sep 10, 2013 6:26 pm

tenhouse wrote:I don't think its broken .

Why not?

Anyway, when there is a power problem, it might help to just remove one disk from the enclosure. Then the power consumption is almost 20% lower, while the array still could be assembled.

If that doesn't work, and your dmesg dump doesn't show anything helpful, I'm afraid your only option is to connect at least 4 disks to a Linux computer, and assemble the array. Any PC can do that. A problem is that you'll need 4 empty sata sockets. An usb-sata convertor probably won't work. I have read several reports that such a convertor exposes 4k logical sectors to the host, when a disk >2TB is inserted. And while that is fine for an external disk, unfortunately the current partition table is not compatible.

by **tenhouse** » Tue Sep 10, 2013 7:00 pm

Yes it is indeed very slow in booting. I also always have a timeout on the telnet client because of this and have to connect manually (just for info :) ) . Last time I posted the dmesg, I copied only to part from "cut it off" or something. But now the whole thing (from a fresh boot, I always power the NAS off at the moment when I'm not "investigating" to prevent "further damage"):

Code: Select all: root@(none):/ # dmesg [ 0.000000] Linux version 2.6.39.4 (root@fvdwsl-nwsp2.local) (gcc version 4.5.4 (GCC) ) #164 PREEMPT Sun Jun 2 20:34:28 GMT+1 2013 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network Nand v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c08fc70c, node_mem_map c0937000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.15.90/,6666@192.168.15.161/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 510320k/510320k available, 13968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0222000 (2152 kB) [ 0.000000] .text : 0xc0222000 - 0xc08cacec (6820 kB) [ 0.000000] .data : 0xc08cc000 - 0xc08fcde0 ( 196 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 4.165829] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 4.255853] pid_max: default: 32768 minimum: 301 [ 4.255996] Mount-cache hash table entries: 512 [ 4.256312] CPU: Testing write buffer coherency: ok [ 4.258245] xor: measuring software checksum speed [ 4.305832] arm4regs : 1090.000 MB/sec [ 4.355832] 8regs : 654.400 MB/sec [ 4.405829] 32regs : 906.000 MB/sec [ 4.405841] xor: using function: arm4regs (1090.000 MB/sec) [ 4.405976] NET: Registered protocol family 16 [ 4.408239] Kirkwood: MV88F6281-A1, TCLK=166666667. [ 4.408254] Feroceon L2: Enabling L2 [ 4.408289] Feroceon L2: Cache support initialised. [ 4.409417] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 4.409449] final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 4.409595] orion-ehci registered [ 4.410334] init_kirwood_nand_1init_kirwood_nand_2init_kirwood_nand_3 [ 4.429601] bio: create slab <bio-0> at 0 [ 4.595967] raid6: int32x1 100 MB/s [ 4.766050] raid6: int32x2 138 MB/s [ 4.936210] raid6: int32x4 129 MB/s [ 5.105896] raid6: int32x8 154 MB/s [ 5.105904] raid6: using algorithm int32x8 (154 MB/s) [ 5.106587] SCSI subsystem initialized [ 5.106954] libata version 3.00 loaded. [ 5.107543] usbcore: registered new interface driver usbfs [ 5.107790] usbcore: registered new interface driver hub [ 5.107952] usbcore: registered new device driver usb [ 5.109476] Switching to clocksource orion_clocksource [ 5.111249] NET: Registered protocol family 2 [ 5.111409] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 5.111997] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 5.112350] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 5.112529] TCP: Hash tables configured (established 16384 bind 16384) [ 5.112539] TCP reno registered [ 5.112550] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 5.112574] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 5.112792] NET: Registered protocol family 1 [ 5.113020] RPC: Registered udp transport module. [ 5.113030] RPC: Registered tcp transport module. [ 5.113038] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.113050] PCI: CLS 0 bytes, default 32 [ 5.115834] Switched to NOHz mode on CPU #0 [ 5.128626] NetWinder Floating Point Emulator V0.97 (double precision) [ 5.213260] VFS: Disk quotas dquot_6.5.2 [ 5.213557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.215291] Registering unionfs 2.5.11 (for 2.6.39.4) [ 5.216700] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.217579] NTFS driver 2.1.30 [Flags: R/W]. [ 5.218097] JFFS2 version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. [ 5.219076] fuse init (API version 7.16) [ 5.220923] JFS: nTxBlock = 3986, nTxLock = 31895 [ 5.222165] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.224170] SGI XFS Quota Management subsystem [ 5.224204] msgmni has been set to 996 [ 5.224888] async_tx: api initialized (async) [ 5.225306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.225321] io scheduler noop registered [ 5.225329] io scheduler deadline registered [ 5.225428] io scheduler cfq registered (default) [ 5.230013] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.250965] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 5.720764] console [ttyS0] enabled [ 5.730793] brd: module loaded [ 5.736963] loop: module loaded [ 5.741639] sata_mv sata_mv.0: version 1.28 [ 5.745925] sata_mv sata_mv.0: slots 32 ports 2 [ 5.752196] scsi0 : sata_mv [ 5.755453] scsi1 : sata_mv [ 5.758526] ata1: SATA max UDMA/133 irq 21 [ 5.762683] ata2: SATA max UDMA/133 irq 21 [ 5.767817] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 5.774490] ONFI flash detected [ 5.777899] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit) [ 5.786380] Scanning device for bad blocks [ 5.806229] Bad eraseblock 199 at 0x0000018e0000 [ 5.946327] Bad eraseblock 1918 at 0x00000efc0000 [ 5.961195] Creating 3 MTD partitions on "orion_nand": [ 5.966314] 0x000000000000-0x000000100000 : "u-boot" [ 5.972169] 0x000000100000-0x000001100000 : "uImage" [ 5.977982] 0x000001100000-0x000010000000 : "root" [ 5.984567] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.991530] mv643xx_eth smi: probed [ 5.997194] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:92:c4:5f [ 6.008030] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:d0:4b:92:c4:60 [ 6.016957] PPP generic driver version 2.4.2 [ 6.021525] PPP Deflate Compression module registered [ 6.026939] PPP MPPE Compression module registered [ 6.031761] NET: Registered protocol family 24 [ 6.036204] tun: Universal TUN/TAP device driver, 1.6 [ 6.041264] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 6.047571] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 6.055923] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 6.064712] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 6.072318] usbcore: registered new interface driver pegasus [ 6.078089] usbcore: registered new interface driver ipheth [ 6.083660] netconsole: local port 6666 [ 6.087478] netconsole: local IP 192.168.15.90 [ 6.091931] netconsole: interface 'eth0' [ 6.095832] netconsole: remote port 6666 [ 6.099750] netconsole: remote IP 192.168.15.161 [ 6.104342] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 6.110481] netconsole: device eth0 not up yet, forcing it [ 6.269526] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 6.276439] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 6.289934] ata1.00: hard resetting link [ 6.640224] ata1.01: hard resetting link [ 7.149763] ata1.02: hard resetting link [ 7.659756] ata1.03: hard resetting link [ 8.209556] ata1.01: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133 [ 8.215711] ata1.01: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.499549] ata1.01: configured for UDMA/133 [ 8.539543] ata1.02: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133 [ 8.545697] ata1.02: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.809558] ata1.02: configured for UDMA/133 [ 8.849552] ata1.03: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133 [ 8.855710] ata1.03: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 9.119549] ata1.03: configured for UDMA/133 [ 9.123972] ata1: EH complete [ 9.136436] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 9.146757] scsi 0:1:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5 [ 9.155675] console [netcon0] enabled [ 9.159328] netconsole: network logging started [ 9.164647] sd 0:1:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.172880] sd 0:1:0:0: [sdc] 4096-byte physical blocks [ 9.178436] scsi 0:2:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5 [ 9.187377] sd 0:1:0:0: [sdc] Write Protect is off [ 9.192364] aoe: AoE v47 initialised. [ 9.196059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.203271] sd 0:2:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.211040] sd 0:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.211140] sd 0:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.220703] scsi 0:3:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5 [ 9.228983] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 9.234229] sd 0:2:0:0: [sdb] 4096-byte physical blocks [ 9.239872] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 9.247652] sd 0:3:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 9.255773] sd 0:2:0:0: [sdb] Write Protect is off [ 9.261653] sd 0:3:0:0: [sda] 4096-byte physical blocks [ 9.266935] sd 0:2:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.267030] sd 0:2:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.276100] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 9.282270] sd 0:3:0:0: [sda] Write Protect is off [ 9.287735] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.287841] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.299532] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 9.305496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.312406] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.319913] usb usb1: Product: Marvell Orion EHCI [ 9.325272] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 [ 9.332304] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd [ 9.338845] usb usb1: SerialNumber: orion-ehci.0 [ 9.344481] hub 1-0:1.0: USB hub found [ 9.348244] hub 1-0:1.0: 1 port detected [ 9.353914] sd 0:1:0:0: [sdc] Attached SCSI disk [ 9.358692] Initializing USB Mass Storage driver... [ 9.364324] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 [ 9.371183] usbcore: registered new interface driver usb-storage [ 9.377506] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 [ 9.385579] USB Mass Storage support registered. [ 9.391183] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 9.399325] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 9.405720] i2c /dev entries driver [ 9.410171] sd 0:3:0:0: [sda] Attached SCSI disk [ 9.415713] sd 0:2:0:0: [sdb] Attached SCSI disk [ 9.420851] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 9.428269] Linux video capture interface: v2.00 [ 9.433197] usbcore: registered new interface driver uvcvideo [ 9.438931] USB Video Class driver (v1.0.0) [ 9.444736] md: linear personality registered for level -1 [ 9.450275] md: raid0 personality registered for level 0 [ 9.455580] md: raid1 personality registered for level 1 [ 9.460910] md: raid10 personality registered for level 10 [ 9.466377] md: raid6 personality registered for level 6 [ 9.471683] md: raid5 personality registered for level 5 [ 9.476977] md: raid4 personality registered for level 4 [ 9.483176] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 9.491816] device-mapper: multipath: version 1.3.0 loaded [ 9.497298] device-mapper: multipath round-robin: version 1.0.0 loaded [ 9.503843] device-mapper: multipath queue-length: version 0.1.0 loaded [ 9.510470] device-mapper: multipath service-time: version 0.2.0 loaded [ 9.517492] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 9.523651] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 9.530032] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 9.569546] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 9.609611] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 9.649538] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 9.669528] usb 1-1: new high speed USB device number 2 using orion-ehci [ 9.689546] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 9.695888] Registered led device: net5big-v2:blue:power [ 9.696044] Registered led device: net5big-v2:red:power [ 9.696197] Registered led device: net5big-v2:blue:sata0 [ 9.696348] Registered led device: net5big-v2:red:sata0 [ 9.696493] Registered led device: net5big-v2:blue:sata1 [ 9.696644] Registered led device: net5big-v2:red:sata1 [ 9.696791] Registered led device: net5big-v2:blue:sata2 [ 9.696954] Registered led device: net5big-v2:red:sata2 [ 9.697100] Registered led device: net5big-v2:blue:sata3 [ 9.697252] Registered led device: net5big-v2:red:sata3 [ 9.697396] Registered led device: net5big-v2:blue:sata4 [ 9.697556] Registered led device: net5big-v2:red:sata5 [ 9.698623] Netfilter messages via NETLINK v0.30. [ 9.703410] nf_conntrack version 0.5.0 (7973 buckets, 31892 max) [ 9.711106] IPv4 over IPv4 tunneling driver [ 9.717117] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.722565] TCP cubic registered [ 9.726957] NET: Registered protocol family 10 [ 9.736844] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.742470] IPv6 over IPv4 tunneling driver [ 9.749289] NET: Registered protocol family 17 [ 9.753872] NET: Registered protocol family 5 [ 9.769537] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.776463] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 9.789833] NET: Registered protocol family 37 [ 9.794282] VFP support v0.3: not present [ 9.798297] Gating clock of unused units [ 9.798305] before: 0x00cfc1dd [ 9.798313] after: 0x00cfc1c9 [ 9.799063] ata2.00: hard resetting link [ 9.804184] rtc-mv rtc-mv: setting system clock to 2013-09-10 18:46:25 UTC (1378838785) [ 9.819906] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 9.826596] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.834331] hub 1-1:1.0: USB hub found [ 9.838147] hub 1-1:1.0: 2 ports detected [ 10.150253] ata2.01: hard resetting link [ 15.699511] ata2.15: link is slow to respond, please be patient (ready=0) [ 20.199510] ata2.01: SRST failed (errno=-16) [ 20.739499] eth0: no IPv6 routers present [ 23.239589] ata2.15: qc timeout (cmd 0xe4) [ 23.243684] ata2.01: failed to read SCR 0 (Emask=0x4) [ 23.248723] ata2.01: reset failed, giving up [ 23.253006] ata2.15: hard resetting link [ 23.759520] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 23.766686] ata2.01: hard resetting link [ 29.319510] ata2.15: link is slow to respond, please be patient (ready=0) [ 33.819509] ata2.01: SRST failed (errno=-16) [ 36.859585] ata2.15: qc timeout (cmd 0xe4) [ 36.863675] ata2.01: failed to read SCR 0 (Emask=0x4) [ 36.868715] ata2.01: reset failed, giving up [ 36.872997] ata2.15: hard resetting link [ 37.379518] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 37.386682] ata2.00: hard resetting link [ 37.740228] ata2.01: hard resetting link [ 43.289508] ata2.15: link is slow to respond, please be patient (ready=0) [ 47.789508] ata2.01: SRST failed (errno=-16) [ 50.829517] ata2.15: qc timeout (cmd 0xe4) [ 50.833612] ata2.01: failed to read SCR 0 (Emask=0x4) [ 50.838654] ata2.01: reset failed, giving up [ 50.842931] ata2.01: failed to recover link after 3 tries, disabling [ 50.849268] ata2.15: hard resetting link [ 51.359590] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 51.709914] ata2.02: hard resetting link [ 52.219759] ata2.03: hard resetting link [ 57.569512] ata2.02: qc timeout (cmd 0xec) [ 57.573610] ata2.02: failed to IDENTIFY (I/O error, err_mask=0x4) [ 57.579708] ata2.15: hard resetting link [ 58.089519] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 58.096084] ------------[ cut here ]------------ [ 58.100694] WARNING: at drivers/ata/libata-sff.c:1322 ata_sff_queue_pio_task+0x30/0x54() [ 58.108747] Modules linked in: [ 58.111820] [<c0231a10>] (unwind_backtrace+0x0/0xe4) from [<c023e464>] (warn_slowpath_common+0x4c/0x64) [ 58.121185] [<c023e464>] (warn_slowpath_common+0x4c/0x64) from [<c023e494>] (warn_slowpath_null+0x18/0x1c) [ 58.130810] [<c023e494>] (warn_slowpath_null+0x18/0x1c) from [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) [ 58.140606] [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) from [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) [ 58.150405] [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) from [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) [ 58.159427] [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) from [<c0514c04>] (ata_qc_issue+0x284/0x2dc) [ 58.168103] [<c0514c04>] (ata_qc_issue+0x284/0x2dc) from [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) [ 58.177550] [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) from [<c0515298>] (ata_exec_internal+0x7c/0x8c) [ 58.187262] [<c0515298>] (ata_exec_internal+0x7c/0x8c) from [<c05270fc>] (sata_pmp_read+0x88/0xc0) [ 58.196196] [<c05270fc>] (sata_pmp_read+0x88/0xc0) from [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) [ 58.205217] [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) from [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) [ 58.215186] [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) from [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) [ 58.226107] [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) from [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) [ 58.236165] [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) from [<c0505198>] (scsi_error_handler+0x80/0x3d0) [ 58.245361] [<c0505198>] (scsi_error_handler+0x80/0x3d0) from [<c0257158>] (kthread+0x84/0x8c) [ 58.253949] [<c0257158>] (kthread+0x84/0x8c) from [<c022cff4>] (kernel_thread_exit+0x0/0x8) [ 58.262266] ---[ end trace 6c74bca151b1188f ]--- [ 58.609916] ata2.00: hard resetting link [ 58.960297] ata2.02: hard resetting link [ 69.469514] ata2.02: qc timeout (cmd 0xec) [ 69.473611] ata2.02: failed to IDENTIFY (I/O error, err_mask=0x4) [ 69.479710] ata2.15: hard resetting link [ 69.989519] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 69.996086] ------------[ cut here ]------------ [ 70.000702] WARNING: at drivers/ata/libata-sff.c:1322 ata_sff_queue_pio_task+0x30/0x54() [ 70.008757] Modules linked in: [ 70.011827] [<c0231a10>] (unwind_backtrace+0x0/0xe4) from [<c023e464>] (warn_slowpath_common+0x4c/0x64) [ 70.021194] [<c023e464>] (warn_slowpath_common+0x4c/0x64) from [<c023e494>] (warn_slowpath_null+0x18/0x1c) [ 70.030819] [<c023e494>] (warn_slowpath_null+0x18/0x1c) from [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) [ 70.040615] [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) from [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) [ 70.050414] [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) from [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) [ 70.059435] [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) from [<c0514c04>] (ata_qc_issue+0x284/0x2dc) [ 70.068110] [<c0514c04>] (ata_qc_issue+0x284/0x2dc) from [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) [ 70.077561] [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) from [<c0515298>] (ata_exec_internal+0x7c/0x8c) [ 70.087272] [<c0515298>] (ata_exec_internal+0x7c/0x8c) from [<c05270fc>] (sata_pmp_read+0x88/0xc0) [ 70.096206] [<c05270fc>] (sata_pmp_read+0x88/0xc0) from [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) [ 70.105226] [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) from [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) [ 70.115197] [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) from [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) [ 70.126117] [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) from [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) [ 70.136175] [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) from [<c0505198>] (scsi_error_handler+0x80/0x3d0) [ 70.145373] [<c0505198>] (scsi_error_handler+0x80/0x3d0) from [<c0257158>] (kthread+0x84/0x8c) [ 70.153958] [<c0257158>] (kthread+0x84/0x8c) from [<c022cff4>] (kernel_thread_exit+0x0/0x8) [ 70.162275] ---[ end trace 6c74bca151b11890 ]--- [ 70.509914] ata2.00: hard resetting link [ 70.860295] ata2.02: hard resetting link [ 71.369757] ata2.03: hard resetting link [ 101.719519] ata2.02: qc timeout (cmd 0xec) [ 101.723614] ata2.02: failed to IDENTIFY (I/O error, err_mask=0x4) [ 101.729708] ata2.02: failed to recover link after 3 tries, disabling [ 101.736052] ata2.15: hard resetting link [ 102.249521] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 102.256082] ------------[ cut here ]------------ [ 102.260690] WARNING: at drivers/ata/libata-sff.c:1322 ata_sff_queue_pio_task+0x30/0x54() [ 102.268746] Modules linked in: [ 102.271816] [<c0231a10>] (unwind_backtrace+0x0/0xe4) from [<c023e464>] (warn_slowpath_common+0x4c/0x64) [ 102.281183] [<c023e464>] (warn_slowpath_common+0x4c/0x64) from [<c023e494>] (warn_slowpath_null+0x18/0x1c) [ 102.290809] [<c023e494>] (warn_slowpath_null+0x18/0x1c) from [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) [ 102.300607] [<c0525084>] (ata_sff_queue_pio_task+0x30/0x54) from [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) [ 102.310402] [<c0526c1c>] (ata_sff_qc_issue+0x1a8/0x1f4) from [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) [ 102.319423] [<c052f1c8>] (mv_qc_issue+0x458/0x4a0) from [<c0514c04>] (ata_qc_issue+0x284/0x2dc) [ 102.328098] [<c0514c04>] (ata_qc_issue+0x284/0x2dc) from [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) [ 102.337549] [<c0514f24>] (ata_exec_internal_sg+0x2c8/0x5c0) from [<c0515298>] (ata_exec_internal+0x7c/0x8c) [ 102.347260] [<c0515298>] (ata_exec_internal+0x7c/0x8c) from [<c05270fc>] (sata_pmp_read+0x88/0xc0) [ 102.356194] [<c05270fc>] (sata_pmp_read+0x88/0xc0) from [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) [ 102.365215] [<c0527160>] (sata_pmp_read_gscr+0x2c/0x80) from [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) [ 102.375185] [<c05277dc>] (sata_pmp_error_handler+0x2d4/0xab0) from [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) [ 102.386105] [<c0522900>] (ata_scsi_port_error_handler+0x160/0x44c) from [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) [ 102.396164] [<c0522c9c>] (ata_scsi_error+0xb0/0xe4) from [<c0505198>] (scsi_error_handler+0x80/0x3d0) [ 102.405360] [<c0505198>] (scsi_error_handler+0x80/0x3d0) from [<c0257158>] (kthread+0x84/0x8c) [ 102.413947] [<c0257158>] (kthread+0x84/0x8c) from [<c022cff4>] (kernel_thread_exit+0x0/0x8) [ 102.422265] ---[ end trace 6c74bca151b11891 ]--- [ 103.119982] ata2.00: hard resetting link [ 103.470396] ata2: EH complete [ 103.489770] Freeing init memory: 2152K

@Mijzelf
Ok you're right that could be the case. I just thought because the "led" of the power-supply is in a light-blue color. Everything is alright. So I put the middle disk out and booted again (to the dashboard):
the boot was still very slow and disk 3 and 5 were hoswn as "missing" and 4 as "empty".

by **fvdw** » Tue Sep 10, 2013 7:24 pm

The slow boot is indeed the cause that telnet is not availaible after 12 seconds. it is loaded after the kernel is fully loaded (in your case after 102 seconds)

It seems to me that ata2 (the second sata port) clearly has a problem

Code: Select all: [ 9.769537] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.776463] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 9.789833] NET: Registered protocol family 37 [ 9.794282] VFP support v0.3: not present [ 9.798297] Gating clock of unused units [ 9.798305] before: 0x00cfc1dd [ 9.798313] after: 0x00cfc1c9 [ 9.799063] ata2.00: hard resetting link [ 9.804184] rtc-mv rtc-mv: setting system clock to 2013-09-10 18:46:25 UTC (1378838785) [ 9.819906] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 9.826596] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.834331] hub 1-1:1.0: USB hub found [ 9.838147] hub 1-1:1.0: 2 ports detected [ 10.150253] ata2.01: hard resetting link [ 15.699511] ata2.15: link is slow to respond, please be patient (ready=0) [ 20.199510] ata2.01: SRST failed (errno=-16) [ 20.739499] eth0: no IPv6 routers present [ 23.239589] ata2.15: qc timeout (cmd 0xe4) [ 23.243684] ata2.01: failed to read SCR 0 (Emask=0x4) [ 23.248723] ata2.01: reset failed, giving up [ 23.253006] ata2.15: hard resetting link [ 23.759520] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 23.766686] ata2.01: hard resetting link [ 29.319510] ata2.15: link is slow to respond, please be patient (ready=0) [ 33.819509] ata2.01: SRST failed (errno=-16) [ 36.859585] ata2.15: qc timeout (cmd 0xe4) [

The port itself seems to come up but the disk seems to fail to come up. This can be a disk failure but also a power failure preventing the disk to spin up.
ata1 having sda, sdb and sdc seems to be ok

You could take out the last two disks (in slot 4 and 5) and see if it then boots without an error.

by **tenhouse** » Tue Sep 10, 2013 7:40 pm

So I did this and when I power the NAS on he is kinda loud (much more noise than before) and only the 2 leds of the missing HDs are glowing (see & hear in video) and he WONT boot anymore. Not even with the fvdw tool.

2013-09-10-19.32.46.mp4

by **fvdw** » Tue Sep 10, 2013 7:49 pm

:scratch
sounds like a power supply hum but the actual power supply is outside the box. I think the fan is controlled by the mainboard but it now seems to halt very early in the boot.

I suggest to take out all the disks and reboot with the standalone kernel.
remember the sequence where the disk were so you can restore them in same order.

by **tenhouse** » Tue Sep 10, 2013 7:57 pm

fvdw wrote::scratch
sounds like a power supply hum but the actual power supply is outside the box. I think the fan is controlled by the mainboard but it now seems to halt very early in the boot.

I suggest to take out all the disks and reboot with the standalone kernel.
remember the sequence where the disk were so you can restore them in same order.

Well this is one of the few things were Lacie did something well :P All disks + all places are numbered with stickers :)

And now the boot was fast as hell:

Code: Select all: root@(none):/ # dmesg [ 0.000000] Linux version 2.6.39.4 (root@fvdwsl-nwsp2.local) (gcc version 4.5.4 (GCC) ) #164 PREEMPT Sun Jun 2 20:34:28 GMT+1 2013 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network Nand v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c08fc70c, node_mem_map c0937000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.15.90/,6666@192.168.15.162/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 510320k/510320k available, 13968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0222000 (2152 kB) [ 0.000000] .text : 0xc0222000 - 0xc08cacec (6820 kB) [ 0.000000] .data : 0xc08cc000 - 0xc08fcde0 ( 196 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 1.260134] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 1.350158] pid_max: default: 32768 minimum: 301 [ 1.350301] Mount-cache hash table entries: 512 [ 1.350616] CPU: Testing write buffer coherency: ok [ 1.352550] xor: measuring software checksum speed [ 1.400137] arm4regs : 1090.000 MB/sec [ 1.450137] 8regs : 654.400 MB/sec [ 1.500133] 32regs : 906.000 MB/sec [ 1.500146] xor: using function: arm4regs (1090.000 MB/sec) [ 1.500281] NET: Registered protocol family 16 [ 1.502544] Kirkwood: MV88F6281-A1, TCLK=166666667. [ 1.502559] Feroceon L2: Enabling L2 [ 1.502595] Feroceon L2: Cache support initialised. [ 1.503723] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 1.503755] final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 1.503902] orion-ehci registered [ 1.504640] init_kirwood_nand_1init_kirwood_nand_2init_kirwood_nand_3 [ 1.523914] bio: create slab <bio-0> at 0 [ 1.690272] raid6: int32x1 100 MB/s [ 1.860355] raid6: int32x2 138 MB/s [ 2.030515] raid6: int32x4 129 MB/s [ 2.200208] raid6: int32x8 154 MB/s [ 2.200217] raid6: using algorithm int32x8 (154 MB/s) [ 2.200896] SCSI subsystem initialized [ 2.201261] libata version 3.00 loaded. [ 2.201855] usbcore: registered new interface driver usbfs [ 2.202100] usbcore: registered new interface driver hub [ 2.202260] usbcore: registered new device driver usb [ 2.203780] Switching to clocksource orion_clocksource [ 2.205545] NET: Registered protocol family 2 [ 2.205705] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 2.206291] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.206644] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 2.206824] TCP: Hash tables configured (established 16384 bind 16384) [ 2.206834] TCP reno registered [ 2.206845] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.206868] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.207084] NET: Registered protocol family 1 [ 2.207311] RPC: Registered udp transport module. [ 2.207321] RPC: Registered tcp transport module. [ 2.207329] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.207342] PCI: CLS 0 bytes, default 32 [ 2.210137] Switched to NOHz mode on CPU #0 [ 2.222917] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.307529] VFS: Disk quotas dquot_6.5.2 [ 2.307827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.309554] Registering unionfs 2.5.11 (for 2.6.39.4) [ 2.310961] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.311837] NTFS driver 2.1.30 [Flags: R/W]. [ 2.312355] JFFS2 version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. [ 2.313339] fuse init (API version 7.16) [ 2.315177] JFS: nTxBlock = 3986, nTxLock = 31895 [ 2.316419] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.318420] SGI XFS Quota Management subsystem [ 2.318453] msgmni has been set to 996 [ 2.319135] async_tx: api initialized (async) [ 2.319548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.319562] io scheduler noop registered [ 2.319570] io scheduler deadline registered [ 2.319669] io scheduler cfq registered (default) [ 2.324253] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.345206] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 2.815003] console [ttyS0] enabled [ 2.825037] brd: module loaded [ 2.831199] loop: module loaded [ 2.835877] sata_mv sata_mv.0: version 1.28 [ 2.840158] sata_mv sata_mv.0: slots 32 ports 2 [ 2.846424] scsi0 : sata_mv [ 2.849685] scsi1 : sata_mv [ 2.852761] ata1: SATA max UDMA/133 irq 21 [ 2.856916] ata2: SATA max UDMA/133 irq 21 [ 2.862051] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 2.868725] ONFI flash detected [ 2.872132] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit) [ 2.880613] Scanning device for bad blocks [ 2.900462] Bad eraseblock 199 at 0x0000018e0000 [ 3.040550] Bad eraseblock 1918 at 0x00000efc0000 [ 3.055417] Creating 3 MTD partitions on "orion_nand": [ 3.060539] 0x000000000000-0x000000100000 : "u-boot" [ 3.066391] 0x000000100000-0x000001100000 : "uImage" [ 3.072210] 0x000001100000-0x000010000000 : "root" [ 3.078796] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 3.085760] mv643xx_eth smi: probed [ 3.091393] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:92:c4:5f [ 3.102228] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:d0:4b:92:c4:60 [ 3.111155] PPP generic driver version 2.4.2 [ 3.115723] PPP Deflate Compression module registered [ 3.121140] PPP MPPE Compression module registered [ 3.125969] NET: Registered protocol family 24 [ 3.130412] tun: Universal TUN/TAP device driver, 1.6 [ 3.135480] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 3.141789] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.150148] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.158938] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 3.166544] usbcore: registered new interface driver pegasus [ 3.172313] usbcore: registered new interface driver ipheth [ 3.177883] netconsole: local port 6666 [ 3.181702] netconsole: local IP 192.168.15.90 [ 3.186155] netconsole: interface 'eth0' [ 3.190056] netconsole: remote port 6666 [ 3.193974] netconsole: remote IP 192.168.15.162 [ 3.198566] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 3.204705] netconsole: device eth0 not up yet, forcing it [ 3.363830] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.370742] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 3.384240] ata1.00: hard resetting link [ 3.734527] ata1.01: hard resetting link [ 4.084533] ata1.02: hard resetting link [ 4.434523] ata1.03: hard resetting link [ 4.784707] ata1: EH complete [ 5.313820] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.320709] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 5.334469] ata2.00: hard resetting link [ 5.684537] ata2.01: hard resetting link [ 6.034525] ata2.02: hard resetting link [ 6.222071] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 6.232950] console [netcon0] enabled [ 6.236632] netconsole: network logging started [ 6.242124] aoe: AoE v47 initialised. [ 6.245862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.252411] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 6.257679] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 6.293829] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 6.313818] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 6.319767] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.326650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.333868] usb usb1: Product: Marvell Orion EHCI [ 6.338562] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd [ 6.344221] usb usb1: SerialNumber: orion-ehci.0 [ 6.349292] hub 1-0:1.0: USB hub found [ 6.353050] hub 1-0:1.0: 1 port detected [ 6.357519] Initializing USB Mass Storage driver... [ 6.362575] usbcore: registered new interface driver usb-storage [ 6.368702] USB Mass Storage support registered. [ 6.373630] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.380974] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 6.387581] ata2.03: hard resetting link [ 6.392190] i2c /dev entries driver [ 6.396476] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 6.404104] Linux video capture interface: v2.00 [ 6.408972] usbcore: registered new interface driver uvcvideo [ 6.414766] USB Video Class driver (v1.0.0) [ 6.420520] md: linear personality registered for level -1 [ 6.426020] md: raid0 personality registered for level 0 [ 6.431321] md: raid1 personality registered for level 1 [ 6.436644] md: raid10 personality registered for level 10 [ 6.442113] md: raid6 personality registered for level 6 [ 6.447420] md: raid5 personality registered for level 5 [ 6.452721] md: raid4 personality registered for level 4 [ 6.458910] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 6.467544] device-mapper: multipath: version 1.3.0 loaded [ 6.473023] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.479568] device-mapper: multipath queue-length: version 0.1.0 loaded [ 6.486183] device-mapper: multipath service-time: version 0.2.0 loaded [ 6.493193] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 6.499349] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 6.505720] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 6.543843] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 6.583843] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 6.623849] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 6.663846] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 6.670159] Registered led device: net5big-v2:blue:power [ 6.670302] Registered led device: net5big-v2:red:power [ 6.670451] Registered led device: net5big-v2:blue:sata0 [ 6.670598] Registered led device: net5big-v2:red:sata0 [ 6.670742] Registered led device: net5big-v2:blue:sata1 [ 6.670893] Registered led device: net5big-v2:red:sata1 [ 6.671039] Registered led device: net5big-v2:blue:sata2 [ 6.671190] Registered led device: net5big-v2:red:sata2 [ 6.671342] Registered led device: net5big-v2:blue:sata3 [ 6.671493] Registered led device: net5big-v2:red:sata3 [ 6.671648] Registered led device: net5big-v2:blue:sata4 [ 6.671799] Registered led device: net5big-v2:red:sata5 [ 6.672898] Netfilter messages via NETLINK v0.30. [ 6.677655] usb 1-1: new high speed USB device number 2 using orion-ehci [ 6.684621] nf_conntrack version 0.5.0 (7973 buckets, 31892 max) [ 6.692270] IPv4 over IPv4 tunneling driver [ 6.698314] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.703749] TCP cubic registered [ 6.708362] NET: Registered protocol family 10 [ 6.718108] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.723689] IPv6 over IPv4 tunneling driver [ 6.728862] ata2: EH complete [ 6.734580] NET: Registered protocol family 17 [ 6.739040] NET: Registered protocol family 5 [ 6.773983] NET: Registered protocol family 37 [ 6.778420] VFP support v0.3: not present [ 6.782438] Gating clock of unused units [ 6.782447] before: 0x00cfc1dd [ 6.782454] after: 0x00cfc1c9 [ 6.783036] rtc-mv rtc-mv: setting system clock to 2013-09-10 19:55:03 UTC (1378842903) [ 6.791473] Freeing init memory: 2152K [ 6.834293] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 6.842258] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.851349] hub 1-1:1.0: USB hub found [ 6.856034] hub 1-1:1.0: 2 ports detected [ 17.723806] eth0: no IPv6 routers present

by **fvdw** » Tue Sep 10, 2013 8:13 pm

this a "normal" dmesg output, both sata ports are detected and initialized including port multipliers.

The problem arises when a multiple disk ares plugged in. This smells to a power supply issue, not sufficient to make the disk start rotating. That could also explains the humming sounds. Could come form the disk not able to spin up.
I am not a raid expert but I know you need at least 3 disks to rebuild the array. So it could be risky to let it boot with only 1 disk. probably nothing will happen as it will fail to build the array. "Mijzelf" is very knowledgeable on raid array so lets also ask his advice.

If you have an empty or spare sata disk you could put that in in slot 1 and see if it boots. If that goes ok try also slot 4 and 5.
I advise not to use a disk with your raid array on it for this experiment

How to check the power supply is another question.

by **tenhouse** » Tue Sep 10, 2013 8:18 pm

Hmm ok thanks, I will wait for his answer then.

What I dont see is:
Why is the humming soudn only there when I remove 2 disk -shouldn't it be the exact opposite?

And I think for raid 5 there are even 4 disk needed for the rebuild ;) So if I don't have 4 healthy disks am bascially f**ked

I tried booting with 2, 2 TB hds.

slot 1:

Code: Select all: root@(none):/ # fdisk -l Disk /dev/mtdblock1: 16 MB, 16777216 bytes 255 heads, 63 sectors/track, 2 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 250 MB, 250609664 bytes 255 heads, 63 sectors/track, 30 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/mtdblock2 doesn't contain a valid partition table Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 121602 976762583 b Win95 FAT32 root@(none):/ # dmesg [ 0.000000] Linux version 2.6.39.4 (root@fvdwsl-nwsp2.local) (gcc version 4.5.4 (GCC) ) #164 PREEMPT Sun Jun 2 20:34:28 GMT+1 2013 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network Nand v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c08fc70c, node_mem_map c0937000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.15.90/,6666@192.168.15.162/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 510320k/510320k available, 13968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0222000 (2152 kB) [ 0.000000] .text : 0xc0222000 - 0xc08cacec (6820 kB) [ 0.000000] .data : 0xc08cc000 - 0xc08fcde0 ( 196 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 1.201012] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 1.291036] pid_max: default: 32768 minimum: 301 [ 1.291179] Mount-cache hash table entries: 512 [ 1.291494] CPU: Testing write buffer coherency: ok [ 1.293428] xor: measuring software checksum speed [ 1.341014] arm4regs : 1090.000 MB/sec [ 1.391013] 8regs : 654.400 MB/sec [ 1.441010] 32regs : 906.000 MB/sec [ 1.441023] xor: using function: arm4regs (1090.000 MB/sec) [ 1.441158] NET: Registered protocol family 16 [ 1.443415] Kirkwood: MV88F6281-A1, TCLK=166666667. [ 1.443429] Feroceon L2: Enabling L2 [ 1.443464] Feroceon L2: Cache support initialised. [ 1.444593] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 1.444625] final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 1.444772] orion-ehci registered [ 1.445510] init_kirwood_nand_1init_kirwood_nand_2init_kirwood_nand_3 [ 1.464778] bio: create slab <bio-0> at 0 [ 1.631150] raid6: int32x1 100 MB/s [ 1.801232] raid6: int32x2 138 MB/s [ 1.971391] raid6: int32x4 129 MB/s [ 2.141106] raid6: int32x8 154 MB/s [ 2.141115] raid6: using algorithm int32x8 (154 MB/s) [ 2.141792] SCSI subsystem initialized [ 2.142157] libata version 3.00 loaded. [ 2.142749] usbcore: registered new interface driver usbfs [ 2.142995] usbcore: registered new interface driver hub [ 2.143156] usbcore: registered new device driver usb [ 2.144689] Switching to clocksource orion_clocksource [ 2.146460] NET: Registered protocol family 2 [ 2.146621] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 2.147206] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.147559] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 2.147739] TCP: Hash tables configured (established 16384 bind 16384) [ 2.147749] TCP reno registered [ 2.147760] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.147783] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.148001] NET: Registered protocol family 1 [ 2.148226] RPC: Registered udp transport module. [ 2.148236] RPC: Registered tcp transport module. [ 2.148245] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.148257] PCI: CLS 0 bytes, default 32 [ 2.151016] Switched to NOHz mode on CPU #0 [ 2.163807] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.248447] VFS: Disk quotas dquot_6.5.2 [ 2.248743] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.250471] Registering unionfs 2.5.11 (for 2.6.39.4) [ 2.251882] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.252759] NTFS driver 2.1.30 [Flags: R/W]. [ 2.253280] JFFS2 version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. [ 2.254261] fuse init (API version 7.16) [ 2.256102] JFS: nTxBlock = 3986, nTxLock = 31895 [ 2.257342] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.259347] SGI XFS Quota Management subsystem [ 2.259382] msgmni has been set to 996 [ 2.260060] async_tx: api initialized (async) [ 2.260475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.260489] io scheduler noop registered [ 2.260498] io scheduler deadline registered [ 2.260597] io scheduler cfq registered (default) [ 2.265173] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.286131] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 2.755935] console [ttyS0] enabled [ 2.765963] brd: module loaded [ 2.772133] loop: module loaded [ 2.776809] sata_mv sata_mv.0: version 1.28 [ 2.781087] sata_mv sata_mv.0: slots 32 ports 2 [ 2.787358] scsi0 : sata_mv [ 2.790616] scsi1 : sata_mv [ 2.793690] ata1: SATA max UDMA/133 irq 21 [ 2.797845] ata2: SATA max UDMA/133 irq 21 [ 2.802986] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 2.809654] ONFI flash detected [ 2.813062] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit) [ 2.821542] Scanning device for bad blocks [ 2.841390] Bad eraseblock 199 at 0x0000018e0000 [ 2.981489] Bad eraseblock 1918 at 0x00000efc0000 [ 2.996357] Creating 3 MTD partitions on "orion_nand": [ 3.001476] 0x000000000000-0x000000100000 : "u-boot" [ 3.007332] 0x000000100000-0x000001100000 : "uImage" [ 3.013149] 0x000001100000-0x000010000000 : "root" [ 3.019730] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 3.026690] mv643xx_eth smi: probed [ 3.032318] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:92:c4:5f [ 3.043156] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:d0:4b:92:c4:60 [ 3.052083] PPP generic driver version 2.4.2 [ 3.056653] PPP Deflate Compression module registered [ 3.062070] PPP MPPE Compression module registered [ 3.066898] NET: Registered protocol family 24 [ 3.071341] tun: Universal TUN/TAP device driver, 1.6 [ 3.076409] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 3.082718] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.091076] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 3.099867] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 3.107471] usbcore: registered new interface driver pegasus [ 3.113235] usbcore: registered new interface driver ipheth [ 3.118804] netconsole: local port 6666 [ 3.122623] netconsole: local IP 192.168.15.90 [ 3.127077] netconsole: interface 'eth0' [ 3.130977] netconsole: remote port 6666 [ 3.134896] netconsole: remote IP 192.168.15.162 [ 3.139488] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 3.145626] netconsole: device eth0 not up yet, forcing it [ 3.304739] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.311646] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 3.325146] ata1.00: hard resetting link [ 3.675438] ata1.01: hard resetting link [ 4.025442] ata1.02: hard resetting link [ 4.375434] ata1.03: hard resetting link [ 4.924770] ata1.03: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.931358] ata1.03: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.994763] ata1.03: configured for UDMA/133 [ 4.999190] ata1: EH complete [ 5.014983] scsi 0:3:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 5.023785] sd 0:3:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.032040] sd 0:3:0:0: [sda] Write Protect is off [ 5.036842] sd 0:3:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.036934] sd 0:3:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.049273] sda: sda1 [ 5.052537] sd 0:3:0:0: [sda] Attached SCSI disk [ 5.534731] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.541624] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 5.555341] ata2.00: hard resetting link [ 5.905448] ata2.01: hard resetting link [ 6.123986] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 6.134914] console [netcon0] enabled [ 6.138574] netconsole: network logging started [ 6.144253] aoe: AoE v47 initialised. [ 6.147991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.154549] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 6.159924] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 6.194827] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 6.214827] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 6.220780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.227567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.234879] usb usb1: Product: Marvell Orion EHCI [ 6.239577] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd [ 6.245150] usb usb1: SerialNumber: orion-ehci.0 [ 6.250240] hub 1-0:1.0: USB hub found [ 6.254002] hub 1-0:1.0: 1 port detected [ 6.258691] ata2.02: hard resetting link [ 6.263724] Initializing USB Mass Storage driver... [ 6.268791] usbcore: registered new interface driver usb-storage [ 6.275013] USB Mass Storage support registered. [ 6.279937] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.287269] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 6.293223] i2c /dev entries driver [ 6.297521] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 6.304958] Linux video capture interface: v2.00 [ 6.309832] usbcore: registered new interface driver uvcvideo [ 6.315621] USB Video Class driver (v1.0.0) [ 6.321376] md: linear personality registered for level -1 [ 6.326880] md: raid0 personality registered for level 0 [ 6.332179] md: raid1 personality registered for level 1 [ 6.337500] md: raid10 personality registered for level 10 [ 6.342969] md: raid6 personality registered for level 6 [ 6.348277] md: raid5 personality registered for level 5 [ 6.353569] md: raid4 personality registered for level 4 [ 6.359775] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 6.368408] device-mapper: multipath: version 1.3.0 loaded [ 6.373888] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.380435] device-mapper: multipath queue-length: version 0.1.0 loaded [ 6.387051] device-mapper: multipath service-time: version 0.2.0 loaded [ 6.394056] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 6.400208] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 6.406578] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 6.444752] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 6.484941] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 6.524848] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 6.564847] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 6.571182] Registered led device: net5big-v2:blue:power [ 6.571325] Registered led device: net5big-v2:red:power [ 6.571472] Registered led device: net5big-v2:blue:sata0 [ 6.571621] Registered led device: net5big-v2:red:sata0 [ 6.571775] Registered led device: net5big-v2:blue:sata1 [ 6.571923] Registered led device: net5big-v2:red:sata1 [ 6.572074] Registered led device: net5big-v2:blue:sata2 [ 6.572225] Registered led device: net5big-v2:red:sata2 [ 6.572374] Registered led device: net5big-v2:blue:sata3 [ 6.572529] Registered led device: net5big-v2:red:sata3 [ 6.572683] Registered led device: net5big-v2:blue:sata4 [ 6.572836] Registered led device: net5big-v2:red:sata5 [ 6.573929] Netfilter messages via NETLINK v0.30. [ 6.578682] usb 1-1: new high speed USB device number 2 using orion-ehci [ 6.585650] nf_conntrack version 0.5.0 (7973 buckets, 31892 max) [ 6.593300] IPv4 over IPv4 tunneling driver [ 6.599331] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.605521] ata2.03: hard resetting link [ 6.610093] TCP cubic registered [ 6.614559] NET: Registered protocol family 10 [ 6.624247] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.630075] IPv6 over IPv4 tunneling driver [ 6.636973] NET: Registered protocol family 17 [ 6.641436] NET: Registered protocol family 5 [ 6.684892] NET: Registered protocol family 37 [ 6.689333] VFP support v0.3: not present [ 6.693344] Gating clock of unused units [ 6.693352] before: 0x00cfc1dd [ 6.693360] after: 0x00cfc1c9 [ 6.693946] rtc-mv rtc-mv: setting system clock to 2013-09-10 20:42:49 UTC (1378845769) [ 6.735103] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 6.741791] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.749516] hub 1-1:1.0: USB hub found [ 6.753344] hub 1-1:1.0: 2 ports detected [ 6.955648] ata2: EH complete [ 6.974996] Freeing init memory: 2152K [ 17.624717] eth0: no IPv6 routers present

slot 4 & 5:

Code: Select all: root@(none):/ # fdisk -l Disk /dev/mtdblock1: 16 MB, 16777216 bytes 255 heads, 63 sectors/track, 2 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/mtdblock1 doesn't contain a valid partition table Disk /dev/mtdblock2: 250 MB, 250609664 bytes 255 heads, 63 sectors/track, 30 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/mtdblock2 doesn't contain a valid partition table root@(none):/ # dmesg [ 0.000000] Linux version 2.6.39.4 (root@fvdwsl-nwsp2.local) (gcc version 4.5.4 (GCC) ) #164 PREEMPT Sun Jun 2 20:34:28 GMT+1 2013 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: LaCie 5Big Network Nand v2 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] free_area_init_node: node 0, pgdat c08fc70c, node_mem_map c0937000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130048 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 netconsole=6666@192.168.15.90/,6666@192.168.15.162/ cap=gpt,lba64 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 510320k/510320k available, 13968k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xfe800000 ( 480 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0222000 (2152 kB) [ 0.000000] .text : 0xc0222000 - 0xc08cacec (6820 kB) [ 0.000000] .data : 0xc08cc000 - 0xc08fcde0 ( 196 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:114 [ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 6.994193] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 7.084217] pid_max: default: 32768 minimum: 301 [ 7.084360] Mount-cache hash table entries: 512 [ 7.084674] CPU: Testing write buffer coherency: ok [ 7.086608] xor: measuring software checksum speed [ 7.134197] arm4regs : 1090.000 MB/sec [ 7.184192] 8regs : 654.400 MB/sec [ 7.234192] 32regs : 906.000 MB/sec [ 7.234205] xor: using function: arm4regs (1090.000 MB/sec) [ 7.234340] NET: Registered protocol family 16 [ 7.236600] Kirkwood: MV88F6281-A1, TCLK=166666667. [ 7.236616] Feroceon L2: Enabling L2 [ 7.236651] Feroceon L2: Cache support initialised. [ 7.237780] initial MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 7.237812] final MPP regs: 01111111 00003311 33331100 33003333 00000033 00000000 00000000 [ 7.237959] orion-ehci registered [ 7.238696] init_kirwood_nand_1init_kirwood_nand_2init_kirwood_nand_3 [ 7.257955] bio: create slab <bio-0> at 0 [ 7.424329] raid6: int32x1 100 MB/s [ 7.594412] raid6: int32x2 138 MB/s [ 7.764573] raid6: int32x4 129 MB/s [ 7.934287] raid6: int32x8 154 MB/s [ 7.934296] raid6: using algorithm int32x8 (154 MB/s) [ 7.934976] SCSI subsystem initialized [ 7.935343] libata version 3.00 loaded. [ 7.935940] usbcore: registered new interface driver usbfs [ 7.936185] usbcore: registered new interface driver hub [ 7.936348] usbcore: registered new device driver usb [ 7.937872] Switching to clocksource orion_clocksource [ 7.939649] NET: Registered protocol family 2 [ 7.939808] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 7.940394] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 7.940747] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 7.940926] TCP: Hash tables configured (established 16384 bind 16384) [ 7.940936] TCP reno registered [ 7.940947] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 7.940970] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 7.941188] NET: Registered protocol family 1 [ 7.941414] RPC: Registered udp transport module. [ 7.941424] RPC: Registered tcp transport module. [ 7.941432] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.941445] PCI: CLS 0 bytes, default 32 [ 7.944200] Switched to NOHz mode on CPU #0 [ 7.957033] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.041677] VFS: Disk quotas dquot_6.5.2 [ 8.041974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.043696] Registering unionfs 2.5.11 (for 2.6.39.4) [ 8.045105] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.045984] NTFS driver 2.1.30 [Flags: R/W]. [ 8.046504] JFFS2 version 2.2. (NAND) (SUMMARY) Â© 2001-2006 Red Hat, Inc. [ 8.047479] fuse init (API version 7.16) [ 8.049322] JFS: nTxBlock = 3986, nTxLock = 31895 [ 8.050564] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.052570] SGI XFS Quota Management subsystem [ 8.052602] msgmni has been set to 996 [ 8.053283] async_tx: api initialized (async) [ 8.053694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.053708] io scheduler noop registered [ 8.053717] io scheduler deadline registered [ 8.053815] io scheduler cfq registered (default) [ 8.058402] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 8.079357] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 8.549158] console [ttyS0] enabled [ 8.559185] brd: module loaded [ 8.565349] loop: module loaded [ 8.570025] sata_mv sata_mv.0: version 1.28 [ 8.574311] sata_mv sata_mv.0: slots 32 ports 2 [ 8.580579] scsi0 : sata_mv [ 8.583837] scsi1 : sata_mv [ 8.586911] ata1: SATA max UDMA/133 irq 21 [ 8.591068] ata2: SATA max UDMA/133 irq 21 [ 8.596204] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 8.602875] ONFI flash detected [ 8.606285] NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit) [ 8.614765] Scanning device for bad blocks [ 8.634615] Bad eraseblock 199 at 0x0000018e0000 [ 8.774710] Bad eraseblock 1918 at 0x00000efc0000 [ 8.789579] Creating 3 MTD partitions on "orion_nand": [ 8.794699] 0x000000000000-0x000000100000 : "u-boot" [ 8.800556] 0x000000100000-0x000001100000 : "uImage" [ 8.806374] 0x000001100000-0x000010000000 : "root" [ 8.812964] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.819931] mv643xx_eth smi: probed [ 8.825550] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:4b:92:c4:5f [ 8.836385] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:d0:4b:92:c4:60 [ 8.845317] PPP generic driver version 2.4.2 [ 8.849884] PPP Deflate Compression module registered [ 8.855301] PPP MPPE Compression module registered [ 8.860130] NET: Registered protocol family 24 [ 8.864572] tun: Universal TUN/TAP device driver, 1.6 [ 8.869633] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 8.875940] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 8.884298] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 8.893090] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 8.900694] usbcore: registered new interface driver pegasus [ 8.906456] usbcore: registered new interface driver ipheth [ 8.912027] netconsole: local port 6666 [ 8.915846] netconsole: local IP 192.168.15.90 [ 8.920299] netconsole: interface 'eth0' [ 8.924200] netconsole: remote port 6666 [ 8.928118] netconsole: remote IP 192.168.15.162 [ 8.932710] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 8.938849] netconsole: device eth0 not up yet, forcing it [ 9.097922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.104832] ata1.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 9.118325] ata1.00: hard resetting link [ 9.468622] ata1.01: hard resetting link [ 9.818626] ata1.02: hard resetting link [ 10.168617] ata1.03: hard resetting link [ 10.518798] ata1: EH complete [ 11.047912] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.054800] ata2.15: Port Multiplier 1.2, 0x11ab:0x4140 r193, 4 ports, feat 0x5/0x1f [ 11.068560] ata2.00: hard resetting link [ 11.418630] ata2.01: hard resetting link [ 11.928153] ata2.02: hard resetting link [ 12.024745] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 12.038725] console [netcon0] enabled [ 12.042378] netconsole: network logging started [ 12.047875] aoe: AoE v47 initialised. [ 12.051607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.058201] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 12.063437] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 12.097919] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 12.117916] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 12.123868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 12.130653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.137851] usb usb1: Product: Marvell Orion EHCI [ 12.142554] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd [ 12.148126] usb usb1: SerialNumber: orion-ehci.0 [ 12.153190] hub 1-0:1.0: USB hub found [ 12.156953] hub 1-0:1.0: 1 port detected [ 12.161618] Initializing USB Mass Storage driver... [ 12.166671] usbcore: registered new interface driver usb-storage [ 12.172689] USB Mass Storage support registered. [ 12.177616] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.185065] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 [ 12.191025] i2c /dev entries driver [ 12.195275] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write [ 12.202857] Linux video capture interface: v2.00 [ 12.207728] usbcore: registered new interface driver uvcvideo [ 12.213521] USB Video Class driver (v1.0.0) [ 12.219410] md: linear personality registered for level -1 [ 12.224885] md: raid0 personality registered for level 0 [ 12.230208] md: raid1 personality registered for level 1 [ 12.235509] md: raid10 personality registered for level 10 [ 12.241100] md: raid6 personality registered for level 6 [ 12.246397] md: raid5 personality registered for level 5 [ 12.251704] md: raid4 personality registered for level 4 [ 12.257861] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 12.266634] device-mapper: multipath: version 1.3.0 loaded [ 12.272151] device-mapper: multipath round-robin: version 1.0.0 loaded [ 12.279153] device-mapper: multipath queue-length: version 0.1.0 loaded [ 12.285753] device-mapper: multipath service-time: version 0.2.0 loaded [ 12.292783] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 12.298933] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 12.305289] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 12.347936] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 12.387935] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 12.427936] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 12.438185] ata2.03: hard resetting link [ 12.467938] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 12.474257] Registered led device: net5big-v2:blue:power [ 12.474400] Registered led device: net5big-v2:red:power [ 12.474551] Registered led device: net5big-v2:blue:sata0 [ 12.474696] Registered led device: net5big-v2:red:sata0 [ 12.474840] Registered led device: net5big-v2:blue:sata1 [ 12.474990] Registered led device: net5big-v2:red:sata1 [ 12.475136] Registered led device: net5big-v2:blue:sata2 [ 12.475287] Registered led device: net5big-v2:red:sata2 [ 12.475438] Registered led device: net5big-v2:blue:sata3 [ 12.475589] Registered led device: net5big-v2:red:sata3 [ 12.475745] Registered led device: net5big-v2:blue:sata4 [ 12.475897] Registered led device: net5big-v2:red:sata5 [ 12.476997] Netfilter messages via NETLINK v0.30. [ 12.481747] usb 1-1: new high speed USB device number 2 using orion-ehci [ 12.488605] nf_conntrack version 0.5.0 (7973 buckets, 31892 max) [ 12.496247] IPv4 over IPv4 tunneling driver [ 12.502290] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.507721] TCP cubic registered [ 12.512224] NET: Registered protocol family 10 [ 12.522026] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.527601] IPv6 over IPv4 tunneling driver [ 12.534450] NET: Registered protocol family 17 [ 12.539022] NET: Registered protocol family 5 [ 12.578073] NET: Registered protocol family 37 [ 12.582512] VFP support v0.3: not present [ 12.586523] Gating clock of unused units [ 12.586531] before: 0x00cfc1dd [ 12.586539] after: 0x00cfc1c9 [ 12.587119] rtc-mv rtc-mv: setting system clock to 2013-09-10 20:38:18 UTC (1378845498) [ 12.638233] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 12.644923] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.652657] hub 1-1:1.0: USB hub found [ 12.656473] hub 1-1:1.0: 2 ports detected [ 12.827985] ata2.01: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 12.834589] ata2.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 12.877953] ata2.01: configured for UDMA/133 [ 12.917944] ata2.02: ATA-8: ST31000520AS, CC37, max UDMA/133 [ 12.923594] ata2.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 12.987950] ata2.02: configured for UDMA/133 [ 12.992387] ata2: EH complete [ 13.008175] scsi 1:1:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 13.016994] sd 1:1:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.025117] scsi 1:2:0:0: Direct-Access ATA ST31000520AS CC37 PQ: 0 ANSI: 5 [ 13.033506] sd 1:1:0:0: [sde] Write Protect is off [ 13.038409] sd 1:1:0:0: [sde] Mode Sense: 00 3a 00 00 [ 13.038507] sd 1:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.048297] sd 1:2:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.056787] sd 1:2:0:0: [sdd] Write Protect is off [ 13.061870] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 13.061966] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.073640] sde: sde1 [ 13.076897] sd 1:1:0:0: [sde] Attached SCSI disk [ 13.123287] sdd: sdd1 sdd2 [ 13.127108] sd 1:2:0:0: [sdd] Attached SCSI disk [ 13.132101] Freeing init memory: 2152K [ 23.527897] eth0: no IPv6 routers present

edit: hmm for 4 and 5 there are no disks in fdisk. but he LEDs were defintely blue, so I had them pluggeg in... anyway will try this tomorrow one more time. Sleeping time now :)

plugout.net

Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Re: Another LaCie 5big Network 2 problem

Who is online