Lacie 5Big2 Failed After Firmware Update

[unlucky1]

Umm how do I reboot with this tool? Exited the tool and just shut off the lacie and turn it back on?

[fvdw]

you can use the command in telnet

Code: Select all

reboot -f

or

Code: Select all

poweroff -f

Maybe the last is better as you need to interupt boot again with the fvdw-sl console

[unlucky1]

Ugh, I closed the tftp window by accident and the program crashed. I need to power off with the switch now, right? I can't connect again with the fvdw console to power down, can I?

[fvdw]

Ugh, I closed the tftp window by accident and the program crashed. I need to power off with the switch now, right? I can't connect again with the fvdw console to power down, can I?

yes just power it off with the switch

[unlucky1]

root@(none):/ # cat /proc/partitions
major minor #blocks name

31 0 500 mtdblock0
31 1 4 mtdblock1
8 0 976762584 sdc
8 16 976762584 sdb
8 32 976762584 sda
8 48 976762584 sde
8 64 976762584 sdd

[unlucky1]

root@(none):/ # e2fsck -y /dev/sdb
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/sdb

The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>

root@(none):/ # e2fsck -y /dev/sda
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/sda

The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>

[Mijzelf]

Eeks.

I'm afraid I made a mistake. Can you post the output of

Code: Select all

ls -l /dev/sdc

[fvdw]

@mijzelf

it was a gpt partition table

further he didn't wrote to sdd why is there the partition table changed ?

[unlucky1]

root@(none):/ # ls -l /dev/sdc
brw-rw---- 1 root root 8, 32 Jun 1 18:17 /dev/sdc

[unlucky1]

Okay, now you're really scaring me.